Paving tiles today are very often used as the material for the tracks or pads on the local area. Moreover, the material is so practical, that his laying consult the owner of a private house.
How laid paving slabs? For this purpose there is a special technology, which is presented below.
1. How to prepare for laying paving slabs
To lay down the material quality, first ensure smooth and reliable basis. Owner must perform the layout, using pegs and nylon string (or the string). Then, in the fenced area get rid of the upper soil layer. Ground leveled, and then the good ram. Especially if the ground is very soft and malleable. If it lay paving slabs, the strain will be available soon.
Now proceed to the creation of the bedding. Sufficient to use ordinary sand, which is filled to such an extent to raise the soil to the desired height (considering that after that he had to rise at the expense of the tile).
2. How to lay paving slabs on the ground
To tile firmly entrenched, the site must be prepared to sleep with a mixture of dry cement and sand. Use the solution is not necessary, just enough to mix the two components so that the sand was about 8 times more. Such podsypku dim layer of not more than 5 cm in thickness.
Already on the dry mixture begin to lay the finishing material. Which pattern will create the owner, it's a private matter. The same can be said about the shape and size of the tiles. Only better to choose a pattern, and even sketch it on paper.
It is possible that after the laying of the fabric will show up irregularities. Get rid of them, if you use a little sand and place it under the most obvious deepening. Generally, in the process of laying it is better not to leave gaps between the elements. If they were, they also lay the cement-sand mixture and well tamped.
3. How to fix paving slabs
Now we need to ensure secure mounting. In the situation described need only throw the water resulting track or pad. Just do not use hose. Better to take a spray bottle, which the water is distributed throughout the lining area. In particular, the liquid is poured between tiles. It remains to place curbs and wipe the seams to get the most aesthetic cladding.
I hope my article has been helpful to you. Comment, laykayte and subscribe to our channel. See you soon!
Subscribeper channel, and we will tell you all the secrets and subtleties of repair, which will help save money and speed up the process.