Warming of the bath is an important activity, since this determines how much of the solid fuel to be used for space heating and maintain the desired temperature. There are several ways.
external insulation
It is that first built the building, supply of communications to it, and then there is insulation from the outside. Usually they use organic insulation materials, as they do not rot and are inexpensive. But they are flammable, so they may not be used inside.
Love bathe on weekends and can not imagine my life without the bathhouse? Then subscribe to the channel "bath | From A to Z"And do not forget to Like!😉
The process itself is as follows:
- First bath itself is built.
- By the walls nailed insulation.
- Install exterior facade.
Matter of what creates a wall, the level of heat loss depends.
internal insulation
It is used in most cases. To operate using mineral wool. It is non-combustible material and retains heat well. That's what needs to be done:
- Attach the plate to the wall.
- Strengthen them by any available means (usually using nails).
- Top folgonirovanny install insulation.
- Set the outer skin that will be visible during operation bath.
Mineral wool does not miss the heat, but it should be changed every 10 - 15 years, as it eventually turns into dust.
combined insulation
It is best to use both types of insulation. It is required to pay special attention to the following:
- places log cabins. During the construction of better use of jute fiber to reduce heat loss. Its spread between the bars and beam.
- The ceiling in the place of the chimney. It is important that all connections have been closed and the cold air does not penetrate into the room.
- Paul, in the manufacture of which it is recommended to use a concrete block. A layer of 10 cm will reduce heat loss. On top of it is filled with concrete and executed cement-sand screed.
Thus, you must provide all the details during the construction of baths. During construction it is recommended to use a thermal imager to examine the most weaknesses and fix the problem before the object is completed. It is important to use high-quality materials that are certified and meet the requirements of GOST-R. A guarantee of security and the fact that the heater will serve for a long time.
Avoid chemical heaters in the bath. Under the influence of high temperature, they emit hazardous substances. Upon reaching the critical values of the room a person can be poisoned and lose consciousness as a result will come death due to body heat, intoxication or other reasons, advancing while in the bath for a long time.