Construction bath with his hands - it is though difficult, but feasible. Special beauty differ chopped bath. They are made from whole logs, and the main tool acts carpenter's ax.
In Russia, has long been an expression existed "cut the bath"That is, to make such a structure of their own from scratch. To date, their own construction log falls into the category of complex, not least because, that a large number of materials, which are much easier to work with inexperienced man.
But chopped bath still remains an attractive option because of its environmental friendliness, durability and appearance. In addition to its facilities require a minimum of tools. The main skill is your carpenter for good reason - log-placed everywhere, rich and poor.
Preparation for construction
The material for the chopped bath - inboard logs of conifers. It is best to use the larch, although it raise the price of construction. If funds are insufficient, larch make the first three or four crown that most get wet. Pine and spruce logs further treated with antiseptics. In the manufacture of the walls there is a butt that is the thickest part of the trunk from the root up to the first branches. Prepare logs in two ways: you can order a ready-made at the sawmill with delivery or get in the forestry permit and dump pine himself and his assistants, and good Skidder GASOLINE.
All vylozhivaniya timber can be spent on the improvement of the foundation. It is made from melkozaglublennoy tape, pile, columnar. For log bath best one is a pile foundation raft - concrete reinforced tape, which binds a pile on the ground.
chop bath
To logs are well secured and the wall was thicker than the upper and lower part of the logs stosyvaetsya. They are flat and better contact with each other. To connect two logs at a right angle to the top log is cut a half circle to the logs became the castle. Four logs in the same level are called crown. The procedure works like this:
Step 1. The upper part of the foundation waterproofing roofing material, is placed over the first crown so that stosannye plane were the top and bottom.
Step 2. Rims konopatochnym paving material, such as lnyanodzhutovym web. Crowns are placed one upon the other, stykuya logs into the locks.
Step 3. Once made box, truss system made of timber and roof Croutes any roofing material. Doors and windows are easier to cut after the construction of a chainsaw - consumption of more material, but much easier.
Other channels of the article:
7 inviolable precepts in the bath
Bath for the joints - the benefits and harms?
Helpful information? Do not forget to Like and subscribe "Bath - from A to Z"!