Bath - a great place to relax in good company. Many of those who built the bath knows that building a log house - half of the case, an important step is the completion of the installation of the canopy. In this article we describe in detail how best to carry out work related to the installation of this element bathhouse building.
The manufacturing process of the canopy
In order for it to be reliable and has served you for many years, it is necessary to carry out and adhere to the following tips:
1. The installation will start from the highest shelves.
2. Main beams must be installed along the entire length of the future canopy at a distance 70-90 cm. apart.
3. Fastening remaining racks implement via screws. To increase the reliability of the design it is recommended to install an additional number of bars. For mounting use special brackets and screws.
4. Then mounted ready to frame. In order to make the design more stable footing, under it attached special rubber lining, which also provide additional protection against water.
5. The next step is the construction of the deck. Begin the process of fixing the bottom.
6. Do flooring at a slight inclineTo ensure normal water care, for the same reason it is necessary to make a small gap between the seat boards.
7. When mounting boards, the cap of the nails must to drive as far as possible in the boardSo as not to get burned when they are heated. In cases where the cap to deepen in the tree does not work, you need to buy plastic caps.
8. It should consider whether you will close the gaps between the rows. If you decide that yes - you need to advance to bother about that material enough to spare. The distance between the floor and the first seats, it is better not to close, since worsens ventilation and decrease the rate of drying of the wood.
9. Alternatively, it is possible to construct Portable seatingIn this case, it will be possible to accelerate the process of drying. For the top row of seats can be designed armrests and headrests. Such innovations will allow you to enjoy the process of taking bath procedures better.
10. The last step is rounding all sharp edges and otshlifovki wooden surface by irregularities.
Other channels of the article:
7 inviolable precepts in the bath
Bath for the joints - the benefits and harms?
Helpful information? Do not forget to Like and subscribe "Bath - from A to Z"!