Greetings to all of our subscribers, and channel visitors, where all articles are created to help all those who have decided on their own to master the manual arc welding.
Let's now add another article in our learning piggy bank, and it will be called Welding in the boat. What is it, and why it is the most convenient and easy.
For a good example, and we take each other to grab the plate 2, so that we got such a compound, where we will need to cook a fillet weld.
The photo shows the top electrode place where we need to make the weld, and this seam will be called fillet welds.
That such angular joints we had to weld the most convenient, fast and efficiently, it is better to do welding in the boat, and it will look like this.
We must set our part so that the product to be welded edges were opportunities to be vertical at 45 degrees. In addition, if possible, try item positioned obliquely to a vertical plane, so slag will flow downwards and will not interfere with the welding process.
An electrode with this method of welding keep vertically or very slightly inclined toward the direction of welding (welding are conducting on the parts of the chute bottom-up electrode itself).
If this will be the small details that make the transverse movement of the electrode is not necessary, just can be relied upon it on the plaster and gently pull the naturally glancing to the arc does not become overly long.
Well, in this case, I did a little oscillatory movements, it all depends on the thickness and size of the workpiece.
That's all we cooked our plates by welding in the boat. What else do I want to add on the subject. Thus it is possible to weld already thick to 14 mm without bevel edges, and the gap do not need more than 10 percent of the thickness of these components, it is the weld root will boil well throughout length.
And I took the corner and pour into him a couple of these nuts-all distributed evenly on the bottom, it's a simple analogy of the welding process in the boat, where the bottom corner will be the root of our seam welded parts.
Therefore, in the angular joints, especially for beginners, try to position the part in this way, enclose anything, tack to the surface of another piece of iron and dimensional more to weld you performed at described above technologies.
If you master the manual arc welding alone, then add the channel to your favorites, so you do not seek, and you will have many useful articles for welding self-taught!