From the usual carton made an interesting shelf for the kitchen

  • Dec 28, 2019
click fraud protection

Hello dear friends!

Many times I've seen on the internet, both from conventional corrugated cardboard to do different furniture. Tables, shelves and the like. I liked it so much that I wanted to try to make something out of cardboard.

And it is not because I am a beggar, how can we find some person, but because I'm interested. I do not see anything wrong with that, to make crafts from waste material. Of unnecessary cardboard or plastic bottles.

If you think that it is unworthy of your attention, just pass by this article, do not waste your time. Thanks!

I needed for the manufacture of shelves:

· Cardboard box;

· Scissors, stationery knife, brush;

· Hot glue, PVA glue;

· Newspapers;

· The glossy magazine;

· Solvent 646;

· Acrylic lacquer;

Step 1.

Take a box of suitable size and cut off all unnecessary. If there is no box, you can simply glue the cardboard all.

We had a size of 10 cm by 8 cm and about 40 cm. Dimensions can be changed at your discretion.

Step 2.

Boca do rounded shelves.

Step 3.

Glue another 2 layers of cardboard to the ledge that she was stronger.

instagram viewer

Step 4.

Pasted over with a cardboard shelf newspaper strips. Sticking to the PVA. If it is too thick, add a little water in it, so it will be easier to glue. In addition, glue is applied on top of the newspaper that she is well soaked. Sushim 12 hours.

Step 5.

Tear into small pieces and glue glossy magazine on the shelf. Dry them for several hours.

Step 6.

Take solvent 646, damp cloth and begin to rub pieces glued log. The paint will wear off and you get an interesting texture.

Step 7.

Cover shelf acrylic lacquer 2 times.

Step 8.

On the back side of the glue a few "key" from beer cans.

Short screws Apply hot glue and screwed into the cardboard. Top screws we put more hot glue. Unfortunately, it failed to impress.

Shelf ready. The result was a very interesting and strong. It can be cleaned with a damp cloth, varnish protects the board from moisture.

Look at what we have made them a cardboard:

A simple hack of corrugated cardboard and tetrapaketa

Toy for seals made of corrugated cardboard

Subscribe to my channel, Sergeitch masterPlease share this article and in social networks.

Thanks a lot!