The lay out the paths between the beds 5 worthy goal

  • Dec 24, 2019

Paths between the beds have always been a problem place any garden. During heavy rains flooded their strongly, and after a long time they can not dry out. Wet ground begins to turn into a swamp, which is easy to sprain a foot or a fall. Work in such conditions becomes impossible.

To solve the problem once and for all, the tracks need to be strengthened. How is it better to do? That's what I want to tell you in his article.

1. wooden platform

A photo: https://img-fotki.yandex.ru/get/6810/265157506.0/0_2a661b_38d1a521_M.jpg
A photo: https://img-fotki.yandex.ru/get/6810/265157506.0/0_2a661b_38d1a521_M.jpg

To strengthen the paths between the beds by using wooden planks of scaffolds and guide bars. This coating dries quickly after rain, there is always smooth and durable. To the platform served for a long time, between the planks should be kept a distance of 1 to 2 cm., And the very wood impregnate protective structure.

Of the disadvantages of wooden tracks we can note the relatively high cost of making, as well as the space between the boards, which may appear weeds. Some gardeners claim that under such cover sometimes settle ants, but confirmation of this I have not found.

2. rubber tiles

A photo: https://www.umeltsi.ru/uploads/posts/2018-01/1516057655_dorozhka2.jpg
A photo: https://www.umeltsi.ru/uploads/posts/2018-01/1516057655_dorozhka2.jpg

To strengthen the paths between the beds can be via rubber rings. Such previously used in stadiums. The ribbed surface is not slippery after rain, and the coating itself does not sink into the wet ground. Tiles fastened to each other by means of grooves and thorns of the system, collect the track could even a child. The stores sell items of different sizes, so find the right is not difficult.

If we talk about the disadvantages, then they can be attributed relatively high cost and relative availability. Sold these tiles in major DIY stores, so in a small village there can not be.

3. plastic tiles

A photo: https://plitkapol.com/assets/images/35/35_2.jpg
A photo: https://plitkapol.com/assets/images/35/35_2.jpg

Make neat straight track with low flanges can be made of special plastic tiles. It is sold in major DIY stores, and is somewhat reminiscent of the designer. Tiles must be laid on a flat compacted surface with good drainage. Gathering process will not take much time, but with the preparation of the track itself will have to tinker.

Of the minuses can be noted the high cost and availability. On the shelves you can find a cheaper counterparts, but they will soon begin to crack and split.

4. paving slabs

A photo: https://postroiv.ru/wp-content/uploads/2016/05/195.jpg
A photo: https://postroiv.ru/wp-content/uploads/2016/05/195.jpg

Paving tile is the best fit to create a durable track. Its surface is not slippery after rain, and the material easily withstands all weather conditions. Thanks to an impressive weight, this track will not be "hlyabat" after rain and with time firmly entrenched in the soil.

Among the shortcomings can be noted a lot of weight and rather complicated process of preparing the ground for laying tiles.

5. flat slate

A photo: https://www.rmnt.ru/pub2/zU/0N/zU0NYnq5.jpg
A photo: https://www.rmnt.ru/pub2/zU/0N/zU0NYnq5.jpg

Flat slate - our favorite gardeners material to strengthen the track. Wide and long sheets fit well between the beds without stagger and do not fall into the wet ground. After the rain, the surface is practically non-slip. Slate is easy to tolerate adverse weather conditions, such as heat and cold. Unlike tiles, sheets can always be cut or trim a conventional metal saw.

Of the minuses can be mentioned and relative fragility of the content in the composition of asbestos.

Join in my group In contact with and Odnoklassniki. There, every day I publish announcements of new materials.

Have a look at my site - What to make fences for beds: 5 decent options