Earlier, I wrote about how, from which you can make high ridges and my readers might have thought that these designs are fully suitable for greenhouses. However, this is not the case, differences still exist. For example, in a confined space greenhouse access to the beds is only possible from one side. This means that you'll often rely knees on a side, to reach the distant plantations. In addition, the greenhouse can be made more thorough design as redevelopment in it are extremely rare. So let's look at a slightly modified versions designed specifically for greenhouses.
1. Fence galvanized profile
The beds in the greenhouse can be made from galvanized corrugated sheet and scraps profile. The shops sell ready designs, but with tools, fencing is better to make your own. So will a lot cheaper and you will not go wrong with the size. Such beds are good that the upper corners of the metal sheet are bent and let rest on their feet. After filling underground construction acquires strength and longer rattle.
If we talk about the disadvantages, they are also available. At the corners are sharp cutting profile which is necessary to smooth out a file. Otherwise, sooner or later they will tear clothing or scratch feet.
2. concrete fence
Since the redevelopment in greenhouses are not made often, fences for beds can be made of reinforced concrete. If you do not feel sorry for reinforcement design will be the strongest of them all that you can imagine. Except the fences, concrete will make the stairs, shelves for buckets and watering cans, as well as the floor. Greenhouse with concrete plan always look well-groomed and thoroughly. I think on such beds, even nicer to work.
However, do not forget the cons. First, the sharp corners after pouring the concrete will need to be rounded. Otherwise, lean legs on the edge, you can not. Secondly, as practice shows, the beds on all sides are made of concrete with drainage problems.
3. wooden fencing
Low ridges reinforce in the greenhouse by using thicker board. This unique and affordable option is also quite durable. In greenhouses, impregnated with a special compound wood can last for more than 10 years. During the work pay attention to the fact that the pegs that hold the board should be kept by the bed. Otherwise, you'll constantly hurt them in the process. The corners of the boards should also be grind off a file or an ax.
Of the disadvantages can be noted durability and appearance of various fungi and bacteria on the surface of the wood.
4. Fence tiles
Of borders, bundled with paving slabs can be made durable beds of any size. In order to guard you could rely on, the tile at the base must be filled with concrete mortar. The process is quite complicated, but would cost expended force result. If all the right thing to do, you'll have a solid frame with smooth paths. At home, the tiles are cut grinder or metal saw.
The disadvantages are the high cost of the material. A border will cost not less than 200 rubles. Heavy and complicated installation process too can hardly be called an advantage.
5. Fence flat slate
As an interim option for a greenhouse layout can consider fences flat slate. The material is rather fragile, but is inexpensive and easy to install. Such bumpers will not lean down or put the watering can with water. also, avoid dropping the tool on them, because the slate has crumbled property. But make these beds will be able to one day having at its disposal only a hammer and a saw for metal.
Join in my group In contact with and Odnoklassniki. There, every day I publish announcements of new materials.
Have a look at my site - What do high beds: 5 decent options