Glasses are a useful accessory. First of all, they help people see better. They are also used to protect the eyes from mechanical stress, sun better and just to look better! Unfortunately, sooner or later various scratches appear on any glasses. With this in mind, it's time to learn how to fix them before there are too many defects on the lens surface.
What products can be used to polish glass lenses
In order to qualitatively remove defects from glass lenses, it is necessary to choose the right product. His choice is based primarily on an assessment of the depth of the existing scratches. Remember that a compound with too weak abrasive properties simply cannot do anything, while a substance that is too strong will remove the protective coating along with the defect.
1. Dentifrice
The main remedy in the fight against scratches on glasses. Before use, the powder is diluted with warm water so that a thick mass is obtained. It is evenly applied to the entire surface of the lens, after which you need to arm yourself with a napkin and start diligently rubbing the composition. At the end of the work, the powder is washed off, and the glasses are again polished with a cloth.
2. Metal polish
Car cleaner is also suitable for eyeglass care. In addition to the polish itself, you will also need alcohol. The product is applied to the lens with a cotton pad and rubbed in with effort for several minutes. After that, the composition is washed off with alcohol, and the glasses themselves are carefully wiped with a cloth.
3. Glass etching agent
You can usually find this substance at a hardware store. The product is based on acid, so it will not be superfluous to read the instructions before use. During work, it is imperative to protect yourself with rubber gloves! Do not forget about safety precautions.
The etching solution is applied to the problem glass without rubbing using cotton swabs, after which the glasses are left alone for 5 minutes. After that, the etching agent is washed off the lenses several times and very thoroughly with water (or using the composition offered to it from the store). Finally, the lenses are wiped with microfiber.
Features of working with plastic lenses
Plastic glasses often have an anti-reflective coating that is very easy to deteriorate. Therefore, it is very important to try to use the most gentle means. In addition, glasses should be thoroughly washed before starting work.
1. Low abrasion toothpaste
A toothpaste with low abrasion properties will do an excellent job of removing shallow defects. The composition should be rubbed into the lenses only with a soft cloth. It is also highly recommended to avoid circular movements while polishing. After finishing work, the paste is washed off with water.
READ ALSO:How can you solder without using a soldering iron: "old-fashioned" technique
2. Soda
This ingredient is definitely found in every home. A little water is added to the soda, after which a characteristic paste should be obtained. It is applied to the lens surface. The composition is rubbed in with an exceptionally soft cloth, with light circular movements. After finishing polishing, the soda is washed off with plain water. If scratches remain after this, the process can be repeated.
>>>>Ideas for life | NOVATE.RU<<<
3. Furniture polish
This tool is almost ideal for working with plastic. Before starting work, the lenses of the glasses should be thoroughly cleaned. After that, the working composition is applied to the entire surface of the plastic and rubbed in with a napkin. Excess polish is removed with a cloth. The procedure is repeated until the bitter end.
If you want to know even more interesting things, then you should look at the material about 11 tricks our grandmothers used, but they are still relevant to this day.
Source: https://novate.ru/blogs/050120/52975/