Creating a blind area around the house is not so much a technically difficult task as physically. Nevertheless, if you set a goal, then creating a good blind area only on your own is quite realistic. The most important thing in such a situation is to be ready to work hard, as well as to know a number of subtleties and tricks regarding the construction process.
The first thing to do is to ask yourself what size the future blind area will be. Calculation and planning play a key role in such projects. It should not be forgotten that the blind area does not have to be the same on all sides. After the plan is drawn up, you can proceed to direct physical work - we take a shovel and remove the top layer of earth around the house according to the size of the future blind area. Much attention is paid to this ditch depth and the installation of a wooden front, since they directly affect the height of the structure being created.
It is recommended to mark every 50 cm on the opened foundation of the house for better orientation. First of all, rubble is poured into the pit. It is evenly distributed over the entire construction area. This is followed by manual ramming of the material or ramming with a vibrating shovel. You can lay a layer of roofing material, but this will make the blind area very expensive. What really should be done without fail before pouring the solution is to lay the reinforcing cage. It will make the structure much more durable and reliable.
READ ALSO: How to Easily Get Rid of Rodents in a Basement, Barn or Cellar: An Integrated Approach
Important: in order to avoid future cracking, the compaction of gravel, the installation of the frame and the pouring of the mortar should be done in one day. The weather should be sunny, but never hot.
>>>>Ideas for life | NOVATE.RU<<<<
And then the long-awaited moment came - the creation of the solution. It is best to use a 100 liter concrete mixer. It contains 20 kg of cement, 3 buckets of sand, 5 buckets of rubble and another 1.5 buckets of water. When the concrete is ready, it is simply poured into several places in bulk, and then leveled with suitable tools over the entire area of the blind area under construction. This stage is one of the most critical, as you should make every effort to create a perfectly even layer.
Now all that remains is to wait. In about a day, the path around the house should become strong enough. If suddenly traces of pets or birds appear on the solution, then (most likely) they can be wiped with a floor polisher, having previously moistened the affected areas with water. As for the wooden limiter panels, they should be held for another 2-3 days.
Continuing the topic, you can read about how to make a holder for a garden hose from a simple plastic bucket.
A source: https://novate.ru/blogs/040520/54386/