How to make eternal the match with his own hands at home

  • Dec 24, 2019

(!)Subscribe to our channel at Zen >>IDEAS FOR LIFE| NOVATE.RU

Doing lighter in the winter.
Doing lighter in the winter.

Fire - it has more strength lies. Particularly well aware of this in the winter, when there should chill. Nobody wants to get into a situation where staying alone with frost. The fire in this situation may be the only chance of salvation. That is why, it is useful to have in your pocket a match that will never let you down.

Materials and tools

Necessary materials and tools.
Necessary materials and tools.

To create an "eternal lighters" need some materials, such as: stainless sheet metal for the body, the metal tube (diameter 3-4 millimeters and a length of 4 centimeters) ferrotserievy rod, two threads, a piece of steel blade for flints, a piece of cotton wool wick rubber seal.

Tool for future works exactly need scissors, a ruler, pliers, soldering iron and flux, sandpaper, boron or machine sanding machine, as well as a marker to create the markup.

process of manufacturing

The most difficult to make the case.
The most difficult to make the case.

The most time-consuming part of the process is the production of the lighter body. During the execution of all measurements, you need to be as precise and cautious. Even a small mistake can lead to the fact that the body is curved. So, cutting billet of stainless sheet 50x50 mm. The middle band is metered 1 cm, armed with the ruler and the pliers are bent edge.

instagram viewer

You can, however, choose a suitable container immediately.
You can, however, choose a suitable container immediately.
An important place is occupied by the production of the wick. Advertising
An important place is occupied by the production of the wick. Advertising

Cut another strip of tin 5h1.5 cm Gnehm it along. We make a 90-degree angle. Heating and soldering workpieces previously processed edge and nazhdachkoy flux ludim workpiece edge. Now we solder them. It remains to produce and to solder the ends. By means of a file remove sharp corners, we clean the entire surface with sandpaper.

Nothing complicated.
Nothing complicated.
It will only have to fill.
It will only have to fill.

When the casing is ready to manufacture the lid and flints, on which the wick and will cling. It should be set into the tube, as well as sticking to the tip. It should also consider installing a rubber gasket-seal so that no gas escapes from the lighter.

Continuing the theme 7 famous lighters from all over the world, who just wanted to hold in their hands and not only.

(!)Subscribe to our channel at Zen >>IDEAS FOR LIFE| NOVATE.RU
A source: https://novate.ru/blogs/121118/48390/