People still do not know so much about the planet, including such popular sections of physics as electrical engineering, examples which surrounds us every day: electric cars on the roads, induction melting furnaces in factories, water heaters at home. But is it possible to get free electricity from the earth itself, and if so, how to do it?
1. According to the Belousov method
Required: 2 capacitors, 2 inductors, 2 grounding electrodes and a consumer (220V light bulb).
The essence of the work is simple:
- Grounding electrodes are a circuit through which the discharges present in the earth pass.
- The advantages of the capacitors are connected and accumulate these same discharges and then they are given to the second coil (the first is used as a filter).
- The second inductor transfers the stored energy to the consumer.
Conclusion: a beautiful way to make a name for yourself on the Internet. It is not clear why the voltage is exactly 220 V, because there is no regulator in the circuit.
2. Earth plus zero - is it possible?
There is also such a method in the network: use the ground loop and the neutral working conductor as a simple single-phase network, but with a much lower voltage. Raise it with a step-up transformer, and then use it for your own purposes.
Conclusion: in principle, such a scheme is possible, since a certain potential always "hangs" at "zero" - no more than 20 V. But you will need a sufficiently powerful transformer and a good, technically correct ground loop.
After assembling such a circuit, obtaining electricity turns into an ordinary... theft. And large capacities, even for providing a private house, will not work. It is much more practical to install solar panels - autonomy, quickly pay off, you can sell energy to the state. How many pluses!
3. Electroplating to the rescue!
You can try to subordinate the galvanic laws, and take in check 2 natural metals - copper and zinc. Both the first and the second are distinguished by their high cost, but you can’t do anything for the sake of free electricity.
How to get electricity using the galvanic method:
- Order (do it yourself) 2 rods. One is zinc and the other is copper. When manufacturing, one should be guided by a simple rule: the larger the rods, the more electricity they will "collect".
- Bury the rods vertically into the ground, at a distance of 30 cm from each other. It is also recommended to make a supersaturated salt solution and treat the soil in large quantities with it near the rods.
- After 20-30 minutes, you can measure the voltage between the rods, and it should be 1-3 V. Not much, but enough to power a small LED.
Conclusion: it is quite possible, but in order to supply at least one 10 W LED floodlight with electricity, rods with a height of at least 15-20 meters will be required. And their cost is quite enough to simply pay for electricity for 5-8 years in advance.
⚡4 way to get free electricity from the ground and other more detailed information, see our video: