(!)Subscribe to our channel at Zen >>IDEAS FOR LIFE| NOVATE.RU
Tinker with the tree is actually not as easy as many would like. There are a lot of secrets and wisdom, not knowing that, you can still breaking the wood. Sometimes - literally. Fortunately, piggy folk wisdom is full of useful tips that will make life easier for both the novice and master.
1. Self-scrolls
If the screw was slightly less than the holes in which to be screwed, you can try to enclose with it the match or wood chips. In most cases, when there is no self-tapping screws or a larger diameter at hand, this solution is able to save out of the problem situation.
2. The key turned out to be more than a bolt
You turned out to be just one key, and it no longer bolt that must be removed? If the difference between the head and the key is not very big, the whole issue is solved. You can try to put a something turnkey. More often than not fit the usual coin.
3. We protect paltsyPomozhet not to discourage the latter.
If you want to drive a nail at some very dangerous for the fingers area, you can try to protect themselves by taking a nail into a clothespin. Hammer nails so much more convenient than it seems at first glance. It turns out even more smoothly, because of clothespin can safely knock a hammer, without fear of consequences.
4. grinding holes
It is necessary to make a hole inside the grinding? This can be done without special tools. It is enough to have on hand sandpaper and drill. Screw him paper and Sui hole. If more and drill at hand is, the grinding takes a matter of seconds.
5. flush head
Use on screws and screws spherical head? To hide them in a tree? Then, after creating the hole, insert the screw workspace drill and make a recess in the tree his head. It should look perfect.
6. plucked brink
Unscrew the screw is not that difficult with torn edges, as it may seem. It is enough to put a kind of skin on the head, and only then lowered her head screwdriver. We'll have a good press and a lot of effort, but this simple method works in most cases.
7. Leaving a smooth edge
When pilish tree, it is likely to leave an uneven edge. To reduce the risk of such "incidents" should be cut in the wrapping space carpenter tape around the perimeter. In this case, the edge will turn out much better.
Continuing the theme unbanal way to restore faded white towel, soak them with vegetable oil and not only.
(!)Subscribe to our channel at Zen >>IDEAS FOR LIFE| NOVATE.RU
A source: https://novate.ru/blogs/091118/48358/