Faucet for the kitchen and its types: wall-mounted, double, touch, for drinking water, for a bathroom, Chinese, Finnish, Bulgarian, Czech, German, Italian, video instructions for choosing your own hands, photos and price

Choosing kitchen faucets, customers are often lost among a huge selection of models from different manufacturers. This article is intended to help navigate this issue.

In it we will talk about the design features of various types of such devices, including a wall-mounted kitchen faucet. In addition, let's talk about the most famous and popular manufacturers of kitchen faucets.

Types of kitchen faucets

By device type

In accordance with this feature, the following types of mixers are distinguished:

• Valve - the most common type. They are best adapted to Russian operating conditions, in particular hard and chlorinated water. Repairing them is inexpensive and mainly consists of replacing rubber seals;
• Ball - they differ from the first ones in their grace and convenience. As a rule, such a kitchen mixer has only one handle, with which you can adjust the temperature and water pressure. The disadvantage is that they are not well suited to work with hard water.
  instagram viewer

Because of this, the ball module available in them begins to seize over time and turn with a creak. Repairing it will cost significantly more than repairing a valve-type kitchen faucet.

By design features

The design of a kitchen faucet can be very diverse.

By design features, the following types of these devices are distinguished:

• Double-lever - in them the flow of water and the change in its temperature is regulated using two handles. The period from one repair to another in this case depends on the wear resistance of the rubber seal used in it;

• Single-lever - in them the function of the valve is performed by a special cartridge, which consists of two plates.

Some of them have a built-in thermostat. This is the name of an automatic regulator that supplies water from a tap at a given temperature. The instructions attached to it describe in detail its setting and regulation of parameters.

The most advanced models are equipped with a water consumption control function. Some state-of-the-art taps even have a touchscreen remote control.

Advice! When buying devices with built-in automation, you should know that they work only at a certain water pressure. If it is below the specified level, then the device simply will not work. Keep this in mind when deciding which types of kitchen faucets to purchase for your home.

Kitchen faucet design options

Currently, a faucet in the kitchen is not just a plumbing device, but at the same time an indicator of the level of comfort of a room and an important element of its design (see also article How to choose a faucet for the kitchen, what characteristics to pay attention to). Reliability of a design and a long service life, a high level of convenience and hygiene, an attractive appearance - these are the main requirements for a two-in-one crane.

There is a very large assortment of these devices in retail chains. But there are certain rules that allow you to choose the right crane (see also article How to choose a faucet for the kitchen: highlights).

At the same time, it will be able to perfectly fit into the interior of the room and will meet the technical requirements for it. On our site there is a video dedicated to this issue.

A modern kitchen is most often implemented in a single design style. Therefore, sinks and faucets for the kitchen should fit the given overall style and not look like foreign objects in the room.

Retro style

For a retro-style interior, an appropriately styled tap is ideal. It should be coated with brass or copper. And also blackened taps, painted in gold or silver.

If the kitchen is made in a classic or Victorian style, then such taps should be combined with a marble or porcelain sink. After all, faucets and sinks for the kitchen must match each other in style. And such a tandem will perfectly fit into the existing interior.

Hi-tech style and minimalism

For these kitchens, futuristic faucets with a matte or glossy surface are perfect. At the same time, the appearance, functionality and quality that plumbing should have will be properly combined.

Classic

A faucet made in the well-known herringbone style is quite suitable for classic-style kitchens. Its design allows an instant flow of cold or hot water.

Remarkable is the fact that such mechanisms are still in fairly high demand. This is due to the habit of buyers buying familiar and proven things, including plumbing. They are also inexpensive.

These faucets usually have a chrome finish. A sink painted white is perfect for them.

But you must keep in mind that any dirt will be clearly visible on it. Therefore, it may be worth purchasing a sink that has a less soiled beige color.

But all in comparison with the two-lever version, the single-lever is preferable. It is more convenient and easy to operate. After all, to open it, you do not need to apply the efforts of your fingers.

Just a push of the hand will be enough. This is very convenient, especially if your hands are slippery and dirty.

Touchless faucets for drinking water are even more convenient. They themselves turn on at the moment when hands are brought up to them.

This saves water. And thanks to the settings of the mixing block, you can set a specific temperature and water pressure.

Another interesting variation is the high spout taps. This watering can allows you to fill tall dishes - vases, pots, etc.

It is also indispensable in the case when the water supply lines are built into the wall. Therefore, it is placed on wall-mounted kitchen faucets.

They look good in the kitchen and draw attention to themselves. But they also have their disadvantages. This design is rather heavy and cumbersome.

Installing it on a small sink will no longer work. In addition, devices with a watering can of this height are more expensive than conventional models.

Modern manufacturers of plumbing have taken care of the convenience of housewives by setting up the production of a pull-out shower (see also article Kitchen faucet with pull-out spout - practical solutions to make your work easier). It can be equipped with both tall and standard mixers. It is located in the crane body itself and, if necessary, is removed to a length of more than a meter.

Its spout can be switched between different modes of water delivery. As with the bathroom siphon, switching this faucet is just as easy with a single movement of the hand.

Such a device simplifies the process of washing tall dishes and sinks, while making it better. With the help of this wonderful device, the issue of filling large containers is also easily eliminated.

All possible doubts about its reliability are in vain. This design is quite reliable and has a long service life. In addition, it is quite easy to service it yourself.

In addition, there are double cranes. They have both a gander and a shower at the same time, which is quite convenient.

Another modern type of these devices is a multifunctional mixer. Its essence lies in the fact that it can solve several problems at once.

An example of such devices are taps that have two spouts or are built directly into the sink. The spouts are isolated from each other.

They can produce water flows of varying temperature and pressure. That is, such an apparatus allows, for example, pouring cold water into a saucepan and at the same time washing your hands with warm water.

Recently, in country houses it has become fashionable to install an American-style mixer right in front of the window. It is quite convenient. After all, you can enjoy the view from the window without leaving the sink (see. Photo).

But there is one problem. If the tap is with a high watering can, then inevitably there is a problem with opening the window.

It can be solved by installing the apparatus with a downward-going gander. Or simply remove the spout before opening the window.

If you are not afraid of the price, then you can put a professional mixer in your kitchen. It will look great in a modern kitchen, because it is a pretty technological design.

This unit is equipped with an excellent overhead shower. Its jet can be easily adjusted with a convenient handle located on the nozzle.

At the same time, the issued water flow is much stronger than that which a conventional tap gives out. When you don't need a shower, you can use a regular gander.

Kitchen faucet manufacturers

The mixers sold in stores are represented by various manufacturers from different countries. Most often you can see products from China, Italy, Germany, Czech Republic, Bulgaria and Finland. Let's consider such products in more detail.

Chinese goods can be seen on our counters more often than others. Typically, buyers make their choice in favor of them when they want to purchase an inexpensive crane. But this does not mean at all that such a device will necessarily be of poor quality.

Indeed, quite often even well-known manufacturers place their production there. For example, Czech kitchen mixers under the Lemark brand are currently assembled there. Another manufacturer from the Czech Republic, Raf, assembles its water regulators in this country too.

In the case of such devices, the most important thing is to be able to distinguish an official product from a fake one. This is not always easy. After all, China produces a huge amount of goods of the most diverse quality.

Traditionally, the most prestigious are devices made in Italy. One of the most popular Italian brands in Russia is Manzarro.

Most of these devices are more expensive than their competitors from other companies. More affordable Italian kitchen faucets are collected in the aforementioned PRC.

Thanks to their reliability and durability, German kitchen faucets have won recognition from buyers. The most popular brands among them are Hansgrohe and Grohe.

They cost much more than their less famous counterparts. But the excellent quality and long service life fully justify the price paid for them.

Bulgarian taps also have good reviews. Their excellent reputation dates back to Soviet times. In Russian, they are represented by Vidima, which offers decent quality for a reasonable price.

Finnish manufacturers are gradually gaining recognition in our country. They usually install ball cartridges in their devices, which significantly increases the product's uptime. The most famous among them are the products of the Oras company.

We are confident that the above information will assist you in choosing the right water regulator for your kitchen. Taking into account the above recommendations, you can choose exactly the model that will delight you with both its design and quality.