1. Friction force
Place the thread in the palm of your hand and pass the thread through the eye of the needle actively. You will get a loop, which itself will tend to get into the hole. The main thing is to pick it up and you're done.
2. Wire
A thin metal thread will greatly simplify the task. Make a loop out of it, insert it into the needle hole and thread. It remains only to pull out the wire and you can start sewing or embroidery.
3. Thread in thread
If you need to thread a thick thread, such as a floss, use a thinner thread. First, do the manipulations similar to the wire method. Pass both ends of the thin thread through the eyelet and pass the thick thread through the loop. Pull it through the hole in the needle and get to work.
4. Water
"Grandfather's" life hack and, in principle, one of the simplest options. The thread will become more pliable, and the excess villi will stick together. Moisten the edge, smooth it, and pull it through the needle hole.
5. Needle threader
A simple threading device will help you forget about the problem once and for all. The needle threader is a budget device that is sold in almost all shops for creativity and needlework. Its principle of operation is similar to the wire method. You need to thread the thread through the loop and pull it into the eye of the needle. There is also an automatic needle threader.
6. Wax
Spread the thread and rub it well with a candle in one place. Make an incision in the oiled area. Such an edge slides deftly into any ear. The thread will not wiggle, so the threading process will run smoothly.
7. Suitable distance
A common mistake is to keep the thread far from the end. In attempts to thread it into the ear, it will begin to bend and "wag". To prevent this from happening, hold the garment close to the edge and aim accurately at the needle hole.
8. Paper
What if a double thread needs to be inserted into the needle of the sewing machine? Plain paper will come to the rescue. Make a funnel out of a piece of sheet and insert the thread into it so that it rests against the corner of the paper product. Pull the "construction" into the eye of the needle and you're done.
Another variant. Cut a thin strip of paper that is slightly smaller than the eyelet of the needle. Fold the sheet in half and insert into the hole. Next, thread the loop through the loop and pull the paper back. Done!
>>>>Ideas for life | NOVATE.RU<<<<
9. Soap
The principle of the life hack is similar to the method with candles. Rub the thread with soap and cut. The edge will harden quickly and slide through the eye of the needle without much effort.
If you find it difficult to thread the needle again, use our life hacks. We also recommend reading about the "secret seam", or how to gracefully patch a hole in clothes with adhesive tape.
A source: https://novate.ru/blogs/120121/57428/
IT IS INTERESTING:
1. Why the Chinese began to abandon the use of bicycles en masse
2. How to toast a lush Turkish omelet that won't fall off after cooking
3. What strange hats did the Afghan mujahideen wear on their heads?