American maple is a real headache for many summer residents. The plant reproduces rapidly by seed and has a high growth rate. Due to the fragile structure of the wood, a broken tree can damage the health of passers-by and buildings in the neighborhood. To get rid of a dangerous neighbor, you need to choose the right method for dealing with maple in the area.
I recommend reading: What fertilizers do experienced gardeners scatter in the snow in March
Mechanical maple removal
If a small number of unwanted trees grow on the site, you can try to remove them manually. This method will require a lot of time and effort.
A number of tools are required to remove the American maple:
- bayonet shovel;
- axe;
- scrap;
- saw;
- secateurs, etc.
To quickly delete a tree, you need to follow a simple sequence of actions:
- The first step is to put on protective clothing and gloves so as not to get hurt or get dirty while working.
- With the help of a saw, most of the plant is removed, leaving a part of the trunk about 2 m high, which will then be used as a lever.
- All horizontal roots that extend from the trunk of the maple are chopped off with an ax.
- Further, in the lower part of the trunk, as close to the ground as possible, cuts are made with an ax around the entire circumference. Then the stump is turned around its own axis to break the main root.
To get to the roots on sandy or clayey soil, it is recommended to first excavate some of the soil around the trunk and walk with a strong stream of water.
For the next couple of years, it is necessary to periodically check the area around the destroyed tree in order to notice and prevent the possible spread of young root shoots in time. If this is not done, the maple will grow rapidly again.
Agrotechnical and chemical methods of dealing with American maple
In the case of the formation of a young root shoot after removing an adult plant, until the shoots are covered with a dense layer of bark, they can be removed by mulching. It is necessary to dig up the area in the area of the emergence of new shoots and cover it with dark covering material. A thick fabric or plastic wrap is perfect for this. Every 15-20 days, the shelter is raised, the appearance of new growth is checked and it is removed.
Glyphosate-based herbicides are suitable for chemical control of the American maple tree. For example, Roundup, Agrokiller, Tornado. In order for the tool to work to the maximum, you must follow the following guidelines:
- A medium-sized tree is sprayed with a solution prepared according to the instructions. It is important to carefully process the entire surface of the plant, not forgetting to pay attention to the overgrowth around the maple.
- After cutting, the resulting cut is well coated with a brush with herbicide.
- Several deep holes are drilled in the lower part of the barrel and the undiluted preparation is injected into them with a syringe.
- Don't try to burn the remaining tree stump. It contains a lot of moisture, which prevents combustion.
With the help of these simple steps, any summer resident can get rid of the American maple on his site.
Do you know how to get rid of the American maple tree?
Original articleand many other materials, you can find on ourwebsite.
Read about how to get rid of snakes in the following article: How to effectively get rid of snakes at their summer cottage