Even if you organize the best and most expensive heating system in the apartment, it will not work effectively without heat retention. Imagine you heat the room, and all the heat goes outside. It turns out that you are freezing in your own house, and nobody canceled the heating bills! In order for the rooms to be really warm, it is necessary to increase the heat transfer of the system, as well as minimize heat loss.
Many apartments and houses today have underfloor heating. They are part of the heating system. There are several methods to improve the performance of such floors. First, you need to insulate the apartment itself. Secondly, it is necessary to increase heat transfer through a warm floor.
How to properly insulate your home
If we consider the insulation from the technological side, then it serves to reduce heat loss. Those. you need to make sure that the cold from the street does not penetrate into the house, and the heat remains inside, not escaping to the outside.
Helps determine how much heat is leaving and how much cold is coming in, thermal radar. But when the apartment is cold with hot batteries, it is clear that the heat does not linger inside. What methods can be used to insulate an apartment:
- 1. Replace old windows with wooden frames with new plastic double-glazed windows. At the same time, it is necessary to ensure that the frames are tightly adjacent to the openings, close up all the cracks, and insulate the seams.
- 2. If it is not possible to install plastic windows, it is necessary to put the old wooden frames in order.
- 3. Cover the walls from the outside with a layer of insulation.
- 4. Assess the state of the front door. It is advisable to replace it with a new one so that cold does not seep into the apartment through the cracks in the doorway. Or insulate an old door.
How to make underfloor heating work better
In order for underfloor heating to work more efficiently, it is necessary to minimize heat transfer to the outside (down through the ceiling). To make it clearer, I will explain: underfloor heating must be done in such a way that the heat rises as much as possible. What methods are used for this:
- 1. If you are making a screed, then first lay a layer of thermal insulation. It is best to use solid plates for these purposes.
- 2. If the height of the screed does not allow laying the slabs, they are replaced with heat-reflecting roll materials. These materials are located under the heating elements of the structure.
- 3. The wooden and polystyrene underfloor heating systems have proven themselves well. They already have a built-in reflector in their kit.
- 4. When using a film underfloor heating, it can be laid without prior screed. It is advisable to use reflective foil, which is laid under the infrared film. If possible, it is better to combine the foil with a heater, layering them on top of each other. This method is also suitable for wall radiators.
- 5. When arranging a warm floor, you need to take care of the floor covering. For example, do not cover them with carpets.
- 6. It is not advisable to mount a warm floor in places where furniture will be installed.
In general, there are no tricks and special methods to improve the efficiency of underfloor heating. But if you listen to these recommendations and follow all of them, then the temperature in the apartment or house will increase by 5-10 degrees. Agree, a good indicator!
Thank you for reading the article to the end! I will be very glad to your like 👍 andchannel subscription.