Friends all welcome. If you live in a private home, it is often in the country, or have started construction, then get hold of any truck is necessary.
On sale now a huge selection of different trucks for any purpose and cargo. But the margin of safety and the quality of them is poor. And if you have a welder and you own an instrument, then the best solution would be to cook a cart to fit your needs the most. Let it not always will be cheaper than the cart from the market, but this homemade survive purchased 10 stores!
That's the challenge came to me at the beginning of this week, the beekeeper friend of mine asked a serious cook wagon on 4 wheels to be able to carry, especially hives, and other heavy things. I'll tell you how to go through the whole process of making this homemade.
The first thing bought wheels, although different couples had to take-in hozmage stayed last 2 wheels, which wanted Comrade, here and had to buy another 2, but that these are not found, but not the point, because even fun looks!
But to be pierced by the axis of the round timber diameter bearings and cut the thread under the nut, I had to turn to the turner. Try on the wheels on the axles Rout.
Now welds on Osia 40 pieces corner, departing at 10 mm from the beginning of the groove space, the way the whole frame of the cart going to do from the same corner 40.
Now we associate the axis longitudinal welded corners, a very important point in the welding, it is be sure to close the space of the bore and the thread of any pipes that have not been put here spatter by welding.
We put the back wheels and vymeryat height racks, which will connect directly the base and kuzovok for hives. Comrade outlined specific figure height of Kuzovkov to be comfortable during transportation and moving ulov.
We catch the bar, exposing them on a square, by the way on the channel have an explanatory article how to grab and scald, to keep the right angle-esteem.
Kuzovok welds itself to the posts and put the wheel-wagon is almost ready!
Now we have to make the handle to the cart, it was decided to make so that it was semnoy. Here, I welded a sleeve of the pipe 25 on the cart, and the very pen made from 20-tube sets tight and virtually no backlash.
Now it will be painted plywood and lay on the floor Kuzovkov. Let's see how this design will show itself in the work, will nedochety- correct. By the way, we try to ride to sample each other on the cart, and in us every Pobol 90 pounds, rolls easily.
Dismantled the home-made, ship the machine, one of these days she will have to carry a lot of work- apiary to autumn in the field, certainly not on the cart, and bring up to the load of the truck!